Specifications
Two section with doors, twelve pan capacity
W x D x H 4813/100″ x 311/2″ x 423/25″ / 122.3cm x 80cm x 107cm
Weight 316 lb / 143.3 kg
Power Output 4.00 Amps
Power Input Type Electric
Primary Power Input 115-120 V x 60 Hz x 1 PH
Features
Features Delfield’s exclusive ABS interior (on sides). ABS is extremely durable – it won’t dent, chip or corrode and is backed by a limited lifetime warranty
ACT control. ACT electronic, solid state control, mounted on the exterior rear of the cabinet, allows unit to maintain precise temperatures in heavy duty conditions.
Patented air screen ensures product stays cold without drying it out.
Equipment is mounted on 5″ (12.7cm) diameter casters; overall height of casters is 6.13″ (15.6cm).
Dual level pan brackets allow the pans to be lowered an additional inch in the unit without tools to provide additional pan temperature holding performance.
Electrical connection is 115 volt, 60 Hertz, single phase. Unit has a 7′ (2.1m) long electrical cord and NEMA 5-15P plug.
Exterior back and bottom are two-piece 24-gauge galvanized steel. Exterior ends are stainless steel.
Exterior top is one-piece, 22-gauge stainless steel with integral 2.12” (5.4cm) square nosing on the front.
All 4400 series units are 100% front breathing, whigh allows the unit to be pushed against a wall or built into a cabinet or an existing line up.
Interior sides are thermoformed ABS plastic with shelves supported on plugs.
Interior back is one-piece 22-gauge stainless steel.
Interior bottoms are thermofoamed ABS plastic.
Base is fully insulated with high-density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane.
Refrigeration system uses R290 refrigerant, and will maintain 36°F (2°C) to 40°F (4°C) interior cabinet temperature.
Durable, rugged stainless steel sides, top and front